| Home | Turn-Key HOT ROD | 23 HOT ROD in a BOX Kit | 27 HOT ROD in a BOX Kit | HOT ROD School in a BOX | Tom & Dave |
Contact: Tom Kuhr at 313.802.3251 or email
|
|
"27 HOT ROD in a BOX Kit"
NEHR Speedcraft has been getting a lot of questions about our ’27 setup. So, we are now introducing our "27 HOT ROD in a BOX Kit" kit with a unique under-slung chassis design that produces a low-slung stance, comfortable ergonomics, and a look firmly grounded in the traditional hot rod style. Although the ’27 kit does not include as many components as our ’23 kit, it certainly gets you further down the road compared to most offerings from other companies and provides a great package for those that want to build their own hot rod! Let NEHR Speedcraft take care of all the hard points and the engineering while you have fun finishing off the car and being part of your own build experience.
John Ireland of Nampa, Idaho just finished his kit...
| Take a Look! |
|
|
Pre-Assembled Option: $400
Kit comes assembled and includes extras such as suspension aligment, fitted floor, assembled rear brakes, and mounted grille shell.
This option is very helpful in providing instructional reference for final assembly. NOTE: This option requires tires from the buyer (which must fit our rim sizes) or selection of our Tire Option (see below).
Tire Option: $470
We offer the car with KUMHO tires P165 R75 15 for the front and P235 R70 15 for the rear. Tires come mounted on our wheels.
Brake & Fuel Lines Option: $400
We offer the car with brake lines and fuel lines completely fitted and installed. Includes all lines, hoses, and fittings.
|
|
|
|
“I am very pleased with the '27 Roller Chassis I bought from NEHR Speedcraft. Everyone that looks at it loves how strong the chassis is from design and material standpoint. The NEHR guys have always been helpful when I call for further build advice - they support the product better than any chassis builder I have worked with. They know their business and can help you avoid pitfalls. ”
Skip Nydam - ND-Automotive, Ypsilanti, MI
Kit Components
- Custom frame TIG welded with 2" x 3" x .125" mild steel tubing.
- Comes with all required crossmembers and mounting brackets/tabs welded in place for the following: engine, transmission, front suspension, rear suspension, brake pedal assembly and master cylinder, steering, and headlights.
- Suspension components (front radius rods & rear ladder bars) built with 4130 chrome-moly rod ends and clevis ends.
- New front and rear transverse leaf springs, batwings, spring perches, shackles, and bolts.
- '40 Ford front axle and reconditioned spindles.
- New master brake and pedal assembly.
- New front disc brake assemblies (rotors, calipers, brake pads, bearings and seals). New front and rear shock absorbers.
- Chevy S-10 rear axle (inspection, new seals, new brakes).
- Comes with all required brackets for mounting spring and ladder bars.
- New steering gear box, clamp and retaining tang/bolts, pitman arm, steering drag link, steering arm, and tie rod link.
- Engine mounts and transmission mount for small block Chevy with an automatic transmission (Turbo 350 automatic trans setup).
- New Fiberglass 1927 Model T body
- New Fiberglass transmission tunnel
- New Seats
- Floor
- New Radiator & electric fan with mounts on frame
- Custome Lakes style headers
- New Chopped Model A grille shell
- New Steel wheels: 15 inch by 6 inch rear, 15 inch by 5 inch front (NOTE: These wheels have the required offset and back spacing to work with our setup)
- Assembly documentation. Online and phone support.
The "27 HOT ROD in a BOX" kit does not include the following:
- Engine & transmission
- Fuel tank
- Windshield
- Battery mount
- Drive shaft
- Gages & wiring
- Paint
- Brake lines & fuel line
- Tires
- Shifter
- Throttle assembly
- Steering shaft & steering wheel
- Head lights & tail lights
Pre-Assembled Option: $400
Kit comes assembled and includes extras such as suspension aligment, fitted floor, assembled rear brakes, and mounted grille shell. This option is very helpful in providing instructional reference for final assembly. NOTE: This option requires tires from the buyer (which must fit our rim sizes) or selection of our Tire Option (see below).
Tire Option: $470
We offer the car with KUMHO tires P165 R75 15 for the front and P235 R70 15 for the rear. Tires come mounted on our wheels.
Brake & Fuel Lines Option: $400
We offer the car with brake lines and fuel lines completely fitted and installed. Includes all lines, hoses, and fittings.
|
|
 
Contact: Tom Kuhr at 313.802.3251 or email
Copyright © NEHR Speedcraft, LLC. All rights reserved.
|
