Not too fond of T-Buckets? Always thought they kind of looked like a cross between a dune buggy and a farm tractor? NEHR Speedcraft, LLC has done a superior job designing and engineering a 23-T roadster with a low-slung stance, comfortable ergonomics, and a look firmly grounded in the traditional hot rod style. NEHR Speedcraft, LLC is now offering "HOT ROD in a BOX" for those that want to build their own hot rod! Let NEHR Speedcraft take care of all the hard points and the engineering while you have fun finishing off the car and being part of your own build experience.

ONLY $11,749.00

NOTE: We offer the car preassembled as seen in the photos below for an additional $350. This provides a good point of reference for your final assembly. Also, some interior and body fitting is done as well.

NOTE: We offer the car with tires (P165 R75 15 & P235 R70 15) as seen in the photos below for an additional $425.

Kit Components

• Custom frame TIG welded with 2" x 3" x .125" mild steel tubing.
• Comes with all required crossmembers and mounting brackets/tabs welded in place for the following: engine, transmission, front suspension, rear suspension, brake pedal assembly and master cylinder, steering, and headlights.
• Suspension components (front radius rods & rear ladder bars) built with 4130 chrome-moly rod ends and clevis ends.
• New front and rear transverse leaf springs, batwings, spring perches, shackles, and bolts.
• New 3" drop front axle and spindles.
• New master brake and pedal assembly.
• New front disc brake assemblies (rotors, calipers, brake pads, bearings and seals). New front and rear shock absorbers.
• Chevy S-10 rear axle (inspection, new seals, new brakes).
• Comes with all required brackets for mounting spring and ladder bars.
• New steering gear box, clamp and retaining tang/bolts, pitman arm, steering drag link, steering arm, and tie rod link.
• Engine mounts and transmission mount for small block Chevy with an automatic transmission (Turbo 350 automatic trans setup).
• Fiberglass Model T body
• Speed blister (creates more footspace for driver)
• Fiberglass transmission tunnel & Interior package (floor, seats, side panels, back pad). Requires fitting, trimming, stretching, and minor fiberglass work).
• Fuel tank
• Windshield posts
• Windshield (scratch resistant MR10 Lexan)
• Steering shaft, support bracket, quick-release hub, and steering wheel
• Throttle pedal assembly
• Seat belt mounting points
• Radiator & electric fan with mounts on frame
• Lakes style headers
• Battery mount
• Model A grill shell
• Steel wheels: 15 inch by 6 inch rear, 15 inch by 5 inch front (NOTE: These wheels have the required offset and back spacing to work with our setup)
• Assembly documentation. Online and phone support.

The SuperKit does not include the following:

• Engine & transmission
• Drive shaft
• Gages & wiring
• Paint
• Brake lines & fuel line
• Tires
• Shifter
• Head lights & tail lights

ONLY $11,749.00